HP 98568A Installation Instruction page 53

Installing RAM in a Model 320
:3. If the number of bytes shown on the screen is:
• More than you expected: don't be concerned
~~your
computer probably
contains some built-in RAM.
• Slightly less than you expected: don't be concerned your computer
consumes a few hundred bytes of RAM as overhead.
• Significantly less than you expected: repeat this procedure, and check for
an increase in bytes after each card is installed.
4. Replace all cover plates on the back of your computer.
Note
You have now installed your RAM cards.
You are now ready to install the peripherals, if any, in
Chapter 4, "Accessory Cards". If you have installed all of
your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX
operating system.
Adding RAM 3-5