HP 98568A Installation Instruction page 170

HP 98642A 4-Channel Multiplexer Interface
Worksheet Entry
You have now installed the HP 98642A 4-Channel Multiplexer Interface.
The following table contains information needed to use the 4-Channel
Multiplexer Interface with the HP-UX operating system.
Copy this select code to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or simply remember to refer here when you
need it.
If you changed the select code in step 2-b) write in your new select code
instead of 13.
When finished, you'll be ready to install your next peripheral or interface.
Table 5-16.
Interface N arne Select Code
HP 98642A
13
5-74 Adding Interface Cards