HP 98568A Installation Instruction page 254

HP 7911/7912/7914 Disk/Tape Drives
Table 6-8.
HP 7911/12/14
Connected to BUilt-in HP-IB Interface (Select Code 7)
Path* File Major
Minor **
Interleave
Device Name Name Type Number Number Factor
HP 7911/12/14 - Disk
/dev/dsk/#sO
b 0
Ox070nOO
HP 7911/12/14 - Disk
/dev/rdsk/#sO c 4
Ox070nOO
HP 7911/12/14 - Tape
/dev/ct/#sO
b
0
Ox070n10
HP 7911/12/14 - Tape
/dev/rct/#sO c 4
Ox070n10
* Replace
#
with any unique number, and use the same number in both the
/dev/dsk and /dev/rdsk entries (e.g., /dev/dsk/1s0 and /dev/rdsk/1s0).
Record the numbers on the Chapter 6, "Mass Storage" tab.
1
1
1
1
**
n is a number that identifies the address (set in step 4 of the Installation
Procedure). Replace n with a 0 if the address was set to 0, use 2 if the address
was set to 2, and so on.
6-28 Adding Mass Storage Devices