Verification Test - HP 98568A Installation Instruction

HP 986258 Disk Interface
Verification Test
1. Plug in the power cord and turn your computer on.
If
you have systems
on-line that the computer can boot, press the space bar a few times to
suspend the automatic booting process.
2. Check the list of components displayed on the left-hand side of the screen:
• If
the message,
HP9S625,
appears in the list, you have correctly installed
the Disk Interface .
• If
the message above does not appear, repeat the installation procedure,
making sure there are no select code conflicts and that the card is firmly
seated in an even-numbered slot.
If
the message still does not appear, call
your HP Service Representative for assistance.
5-38 Adding Interface Cards