Worksheet Entry; Hp-Ux Notes - HP 98568A Installation Instruction

Worksheet Entry
You have now installed the SRM Interface.
HP 98629A SRM Interface
HP 50961 A SRM Interfaces
The following table contains information needed to use the SRM Interface with
the
HP-UX
operating system.
Copy this select code to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or simply remember to refer here when you need
it.
If you changed the select code, write in your new select code instead of 21.
When finished, you'll be ready to install your next peripheral or interface.
Table 5-14.
Interface N arne Select Code
HP 98629A
21
HP-UX Notes
• The SRM Interface ships with select code
21,
the same as the
HP 98643A
LAN Interface.
If you have both interfaces, change the SRM interface to a
different value. See the manual that came with the SRM Interface for a list
of settings .
• A
typical
mknod
for an SRM Interface set to select code
21
and node address
o
is:
#
mknod / dev / srm 13 c Ox150000
Adding Interface Cards 5-67