Hp 2227 Alb - HP 98568A Installation Instruction

Installation Procedure
HP 2227 AlB
QuietJet Plus
and 2228A QuietJet Printers
The following procedure describes how to connect your HP 2227
AlB
QuietJet
Plus or 2228A QuietJet printer to your Series 300 computer. Before you do
this, however, refer to the manual(s) that came with your printer to:
• Unpack the printer.
• Connect the Power Module 1.
And now, the installation procedure ...
1. Play It Safe.
Turn your computer and printer off, if they are not already off.
2. Select Your Interface.
a. If you have an HP 2227 A or 2228A printer: use only an RS-232C
interface. Use anyone of the following RS-232C interfaces:
• The built-in RS-232 interface in a Series 300 computer.
• HP 98626A RS-232C Interface.
• HP 98628A Datacomm Interface.
• HP 98644A RS-232C Serial Interface.
b. If you have an HP 2227B printer: use either the built-in HP-IB interface
or an HP 98624A HP-IB interface. Avoid placing the printer on the same
interface used by your disk or tape drives, if possible.
3. Set the Address.
SKIP?
Skip to step 4 if your printer is an HP 2227 A or 2228A
(RS-232C interface).
For the HP 2227B printer (HP-IB interface), if this is the first
(or only) printer you are connecting to the interface, skip to
step 4. The address should be preset to 1 and shouldn't need
to be changed - unless you have changed the address of some
other device on the interface to
1.
a. Find the two banks of switches located inside the front cover.
Adding Printers 7-9