Siemens SINAMICS G130 Manual page 308

Acceptance test and acceptance report
10.6 Conclusion of the report
Safety logbook
Checksum for functional tracking of changes
Checksum for hardware dependent tracking of changes
Time stamp for functional tracking of changes
Time stamp for hardware dependent tracking of changes
These parameters can be found in the expert list of the Control Unit.
1)
Data backup
Parameter
PLC program
Circuit diagrams
Countersignatures
Commissioning engineer
This confirms that the tests and checks have been carried out properly.
Date
Machine manufacturer
This confirms that the parameters recorded above are correct.
Date
308
Storage medium
Type Designation
Name
Name
Functional
1)
r9781[0] =
r9781[1] =
r9782[0] =
r9782[1] =
Date
Company/dept.
Company/dept.
Function Manual, 05/2010, A5E03264275A
Storage location
Signature
Signature
Safety Integrated