Connecting
4.3 Opening the front cover
Procedure for D4x5‑2 and CX32‑2
1. Release the latch at the top on the inside of the front cover by pushing down the hook (see
the following figure).
2. Remove the front cover with a forward motion.
Figure 4-4
Note
All cables must be routed vertically upwards to the fullest extent possible so that the front
cover can be closed. The front cover has an outlet for the upward routing of these cables.
See also
Removing the cover of the CX32-2 (Page 50)
62
Opening the front cover using the D4x5-2 as an example
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2