Removing The Cover Of The Cx32-2 - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Hide thumbs Also See for SIMOTION D4x5-2:

Table of Contents

3.3 Installing supplementary system components

CX32‑2 with spacers on a mounting surface

To achieve the correct mounting depth for a booksize line-up with internal air cooling, a spacer

is pre-assembled on the CX32‑2. The spacer must then be fixed to the mounting surface.

Removing the cover of the CX32-2

Actions to remove the cover of the CX32-2

Several steps are required to remove the cover:

● Swing open through approx. 45°

Note that the cover can only be removed when it has been swung open through approx. 45°.

Table of Contents