Row Position Pattern (Holes1) - Siemens SINUMERIK Series Operating Manual

Parameter Description
Selection Coordinate system (only available for axis selection XY)
● Right-angled
● Polar
Z0 Z coordinate of the reference point (abs)
Axes: XY / coordinate system – polar
XP X coordinate of the reference point – pole (abs)
YP Y coordinate of the reference point – pole (abs)
L0 Length (abs) – distance of the 1st Position from the pole
C0 Angle (abs) – Angle of the 1st position referred to the reference axis
L1 ... L7 Lengths of additional positions (abs or inc)
C1 ... C7 Angles of additional positions (abs or inc)
(only for ShopMill) Axes: XY / coordinate system – right angled
X0 X coordinate of the 1st position (abs)
Y0 Y coordinate of the 1st position (abs)
X1 ... X8 X coordinate for further positions (abs. or inc.)
Y1 ... Y8 Y coordinate for further positions (abs. or inc.)
(only for G code) (only "right angled")
X0 X coordinate of the 1st position (abs)
Y0 Y coordinate of the 1st position (abs)
X1 ... X8 X coordinate of additional positions (abs or inc)
Y1 ... Y8 Y coordinate of additional positions (abs or inc)
Axes: XA
X0 X coordinate of the 1st position (abs)
A0 A coordinate (angle) of the 1st position (abs)
X1 ... X8 X coordinates of additional positions (abs or inc)
A1 ... A8 A coordinates (angle) of additional positions (abs or inc)
Axes: XYA
X0 X coordinate of the 1st position (abs)
Y0 Y coordinate of the 1st position (abs)
A0 A coordinate (angle) of the 1st position (abs)
X1 ... X5 X coordinates of additional positions (abs or inc)
Y1 ... Y5 Y coordinates of additional positions (abs or inc)
A1 ... A5 A coordinates (angle) of additional positions (abs or inc)
10.1.12

Row position pattern (HOLES1)

Function
You can program any number of positions at equal distances along a line using the "Row
position pattern" function.
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Programming technological functions (cycles)
10.1 Drilling
Unit
mm
mm
mm
mm
mm
Degrees
mm
Degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
Degrees
mm
mm
mm
mm
Degrees
mm
mm
Degrees
411