Siemens SINUMERIK Series Operating Manual page 913

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Creating a program block

If program blocks are missing, you can add them via the vertical softkey bar. You can also

delete blocks via the vertical softkey bar. You can also modify the networks of interrupt routines

and subprograms on the control and save and load your changes.

Marshalling data

You can "rewire" inputs (via INT_100) or outputs (via INT_101) for service purposes.

Saving the PLC project when changing the operating area

If you have created blocks or inserted, removed, or edited networks in a block, you must save

the project before you change from the PLC area to another operating area. Transfer the project

to the PLC using the "Load to CPU" softkey. If this is not done, all of the changes will be lost

and must be re-entered.

Please take the appropriate program note into consideration.

Creating a new block

You create new program blocks in the Ladder editor.

Number of subpro‐

Access protection

You have the option of protecting blocks that have been newly created against being accessed.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Machine manufacturer

Please observe the information provided by the machine manufacturer.

SBR, INT_100, INT_101, INT_0

The number from the selection field "Number of subprogram" is taken for

the name of the INT block.

Maximum 48 characters are permitted.

You must select a free subprogram number between 0 and 255.

For INT100, INT101, and INT0, the field is filled automatically and cannot

Individual / Manufacturer

This data class is automatically filled by the system and cannot be edited.

Maximum 100 lines and 4096 characters are permitted.

Edit PLC user program (828D only)

23.5 View of the program blocks