Context Menu; Changing The User Interface Language - Siemens SINUMERIK Series Operating Manual

2.4.10

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
Cut Ctrl+X
● Copy
Copy Ctrl+C
● Paste
Paste Ctrl+V
Program editor
Additional functions are available in the editor
● Undo the last change
Undo Ctrl+Z
● Redo the changes that were undone
Redo Ctrl+Y
Up to 50 changes can be undone.
2.4.11

Changing the user interface language

Procedure
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Press the "INCH" key to convert millimeters to inches.
The button is highlighted in blue.
3. Press the "=" key on the calculator.
The calculated value is displayed in the entry field. The key for the unit
is highlighted in gray once again.
1. Select the "Start-up" operating area.
2. Press the "Change language" softkey.
The "Language selection" window opens. The language set last is selec‐
ted.
3. Position the cursor on the desired language.
4. Press the "OK" softkey.
- OR -
Introduction
2.4 User interface
55