Siemens SINUMERIK Series Operating Manual page 611

Parameter Description
C1 The required angle can be freely entered
(for ShopMill pro‐
gram)
αC Rotational position for a pole position
(for ShopMill pro‐
gram)
Hirth joint
● Round to the next Hirth joint
● Round up to Hirth joint
● Round down to Hirth joint
Note:
For machines with a Hirth joint
Tool Tool tip when swiveling
● Tracking
● No tracking
Preferred direction Preferred direction of the swivel axis for several possible alignments of the machine
(for ShopMill pro‐
gram)
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇+∇∇∇ (complete machining)
Machining ● Face
direction
● Longitudinal
Position
● front
● back
● inside
● outside
D Maximum depth infeed - (only for ∇)
XDA First grooving limit tool (abs) – (only for face machining direction)
XDB Second grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for UX)
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
The position of the tool tip is maintained during swiveling.
The position of the tool tip is not maintained during swiveling.
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Unit
Degrees
Degrees
mm
mm
mm
mm
mm
611