Siemens SINUMERIK Series Operating Manual page 378

Programming technological functions (cycles)
10.1 Drilling
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining posi‐
● Single position
tion (only for G
Drill hole at programmed position
code)
● Position pattern
Position with MCALL
Z0 (only for G Reference point Z
code)
FR (only for G Feedrate during retraction
code)
FR (only for Shop‐ Feedrate during retraction
Mill)
Z1 Drilling depth (abs) or drilling depth in relation to Z0 (inc)
It is inserted into the workpiece until it reaches Z1. - (for tip centering only)
DT
● Dwell time (at final drilling depth) in seconds
● Dwell time (at final drilling depth) in revolutions
* Unit of feedrate as programmed before the cycle call
378
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Drilling Reaming" softkey.
4. Press the "Reaming" softkey
The "Reaming" input window opens.
mm
mm
*
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/rev
rpm
m/min
Unit
mm
*
mm/min
mm/rev
mm
s
rev
Milling