Siemens SINUMERIK Series Operating Manual page 520

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
G code program parameters
PL Machining plane
SC Safety clearance
F Feedrate
520
3. Press the "Groove" softkey.
The "Groove" input window opens.
4. Select one of the three groove cycles with the softkey:
Simple groove cycle
The "Groove 1" input window opens.
- OR -
Groove cycle with inclines, radii, or chamfers.
The "Groove 2" input window opens.
- OR -
Groove cycle on an incline with inclines, radii or chamfers.
The "Groove 3" input window opens.
ShopMill program parameters
T
mm D
* F
S / V
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/rev
rpm
m/min
Milling