Siemens SINUMERIK Series Operating Manual page 320

Creating a ShopMill program
9.1 Program views
If the programs of several channels are displayed, the associated commands are displayed in
one line.
Display
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Graphic view
The graphic view shows the contour of the workpiece as a dynamic graphic with broken lines.
The program block selected in the work plan is highlighted in color in the graphic view.
Figure 9-2
320
Meaning
Synchronization command
1. You can move between the program blocks in the work plan by
pressing the <Cursor up> and <Cursor down> keys.
2. Press the ">>" and "Graphic view" softkeys to display the graphic
view.
Graphic view of a ShopMill program
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling