Siemens SIMATIC Ident Function Manual page 75
Rfid systems. ident profile, add-on instruction for rockwell systems
Hide thumbs
Also See for SIMATIC Ident:
- System manual (362 pages) ,
- Function manual (142 pages) ,
- Operating manual (80 pages)
Table of Contents
Advertisement
Table 4- 54
Byte
Bytes 1...8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Table 4- 55
20 bytes
8 KB
32 KB
64 KB
*
The OTP memory is not initialized with this command.
)
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Explanation of the structure of the data attachment for the "FORMAT" command
Description
Reserved for security code (must be assigned "0", since SIMATIC RFID has had
no code previously)
Length of the following data, here 6
Permanently set to "0x03"
Permanently set to "0x00"
"INIT" value: The data area of the transponder is written with this value (hex for-
mat).
Permanently set to "0x00"
Memory size of the transponder (end address + 1; high byte, hex format)
Memory size of the transponder (end address + 1; low byte, hex format)
Memory sizes of the transponders
Transponder type
RF300
EEPROM
RF300
FRAM *)
RF300
FRAM *)
RF300
FRAM *)
Configuring the instructions
4.6 Programming the Ident profile
Memory size
00 14
20 00
80 00
FF 00
INIT duration
approx. 0.2 s
0.9 s
3.6 s
7.2 s
75
Advertisement
Table of Contents
