Warnings - Siemens SIMATIC Ident Function Manual

5.4

Warnings

Byte 3 of the "STATUS" output parameter indicates warnings if byte 0 of the "STATUS"
(instruction numbers) has the value "Fxh" or "Dxh".
Table 5- 3
Bytes 0...2
FxFExxh
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Possible warnings when working with the Ident profile
Byte 3 Meaning
Bit 0 The bit is always set to "0"
Bit 1 Depends on the manufacturer
Bit 2 Battery low
Bit 3 Depends on the manufacturer
Bit 4 Depends on the manufacturer
Bit 5 Depends on the manufacturer
Bit 6 Depends on the manufacturer
Bit 7 Depends on the manufacturer
Error messages
5.4 Warnings
111