Siemens SIMATIC Ident Function Manual page 33

Table 4- 13 ATTRIBUTE "0x81"
Name
NUM MDS
TAG_DATA
TAG_DATA[1]
reserved
ID_LEN
EPC_ID
tagPC
RSSI
MaxRSSI
MinRSSI
channel
antenna
polarization
time
power
filterDataAvailable
Inventoried
TAG_DATA[2]
...
TAG_DATA[n]
Indicates how often the transponder was identified via the air interface before it changed to the "Observed" status.
1)
Results for RF620R, RF630R
The RF620R/RF630R data types of the ATTRIBUTE "0x82, 0x83, 0x85, 0x90, 0x91, 0x92"
are not included in the library of the add-on instructions. If required, you can create these
data types. You can find information on this in the manual "Ident profile and Ident blocks,
standard function for Ident systems
(https://support.industry.siemens.com/cs/ww/en/ps/14971/man)".
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Type Comment
INT Number of MDS
IID_IN_I_81[n]
IID_IN_1_81
SINT
SINT EPC length
SINT[62] EPC-ID
INT
SINT RSSI value
SINT highest RSSI value
SINT lowest RSSI value
SINT channel; 1..15_ESTI; 1..53:FCC
SINT antenna; bit coded;
Bit 0 = antenna 1; Bit 1 = antenna 2;
Bit 2 = antenna 3; Bit 3 = antenna 4
SINT polarizatuin of antenna;
0=undefined; 1=circular; 2=vertical linear;
3=horizontal
DINT timestamp
SINT power in dBm
SINT 0=false; 1=true
INT
1)
IID_IN_1_81
...
IID_IN_1_81
Configuring the instructions
4.5 Programming add-on instructions
33