Cable/Terminal/Torque Specifications - Toshiba ACE-tronics G9 ASD Installation And Operation Manual

Adjustable speed drive
Hide thumbs Also See for ACE-tronics G9 ASD:
Table of Contents

Advertisement

Cable/Terminal/Torque Specifications

Installation should conform to the 2008 National Electrical Code Article 110 (NEC) (Requirements for
Electrical Installations), all regulations of the Occupational Safety and Health Administration, and any
other applicable national, regional, or industry codes and standards.
Note:
The following ratings are guidelines and shall not be the sole determining factor of the
lug or wire size used with the ACE-tronics G9 ASD. Application-specific applicables,
wire insulation type, conductor material, and local and regional regulations are but a
few of the considerations when selecting the actual lug and wire type to be used with the
ASD.
Note:
Cable/Terminal specifications are based on the rated current of the ASD.
The specifications Do Not include the 10% Service Factor.
Note:
Use only 75° C copper wire/cable for motor and power connections.
For additional installation information see the section titled
Table 21. 230-Volt ACE-tronics G9 ASD Cable/Terminal/Torque Specifications.
Model
MCP Rating
Number
(Amps)
ACEG92000
ACEG92001
15
ACEG92002
ACEG92003
30
ACEG92005
ACEG92007
50
ACEG92010
ACEG92015
75
ACEG92020
100
ACEG92025
125
ACEG92030
150
ACEG92040
175
ACEG92050
200
ACEG92060
250
ACEG92075
300
ACEG92100
400
Note:
(*) Indicates that the item is one of a set of two parallel cables.
272
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Typical Wire/Cable
Size
AWG or kcmil
Wire-Size/Lug-Capacity for
Input/Output Power
Recommended Maximum
3Ø-Input
14
10
12
10
8
8
4
6
3
4
2
2
1
1/0
4/0
3/0
4/0
*3/0
*4/0
*250
*250
Installation and Connections on pg.
Lug Size Range
Input/Output Power
3Ø-Output
14 to 8
12 to 8
10 to 4
(3-core shield)
8 to 3
12 to 1/0
4 to 1/0
6 to 250
2 to 300
6 to 250
ACE-tronics G9 ASD Installation and Operation Manual
14.
Terminal
Board
Torque
TB1 – 4
3Ø-Input 3Ø-Output
Terminals
In-Lbs./Nm
11.5/1.3
17.7/2.0
20
21/2.4
5.3/0.6
50/5.7
53/6
275/31
168/19
275/31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents