Cpu Fan; See Field Replacement Preparation On Page; See Chassis Cover - GE ApexPro Service Manual

Telemetry server
Hide thumbs Also See for ApexPro:
Table of Contents

Advertisement

CPU fan

2001989-203C
8.
Lift the CD ROM drive off of the CD/hard drive carrier.
9.
Reverse the steps in this procedure to install the CD ROM drive.
1.
Complete the preparation procedures.
7-3.
2.
Remove the chassis cover.
3.
Disconnect the CPU fan power connector from the left front corner of the CPU
main board. Note the position and orientation of the connector for reassembly.
Fan power connector
4.
Rotate the latches securing the memory card out and down. Remove the memory
card from the slot in the CPU main board.
ApexPro™ Telemetry
Parts lists, drawings and replacement

See Field replacement preparation on page

See Chassis cover on page 7-6.
068A, 066A
071A
019A
7-23

Advertisement

Table of Contents
loading

Table of Contents