Fujitsu ETERNUS DX60 S3 User Manual page 360

Chapter 8 Advanced Copy Status
8.1 Advanced Copy (Basic Information)
• Status
The status for XCOPY sessions are displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
●
Virtual Volume Sessions Information
For the ETERNUS DX60 S3, this session information is not displayed.
• Session Count
The number of Virtual Volume sessions that are currently running is displayed.
The "Session Count" is a total of copy sessions in all the statuses including "
Count] link to display the list of sessions.
- ETERNUS DX100 S3
0 - 4096
- ETERNUS DX200 S3
0 - 4096 (8192) (*1)
- ETERNUS DX500 S3/DX600 S3
0 - 16384
- ETERNUS DX8100 S3
0 - 16384
- ETERNUS DX8700 S3/DX8900 S3
0 - 65535
- ETERNUS AF250
0 - 1536
- ETERNUS AF650
0 - 6144
- ETERNUS DX200F
0 - 1536
*1: Values in parentheses indicate the number of sessions when "Expand Volume Mode" is "Enable". Refer to "Setup
Subsystem Parameters" in "ETERNUS Web GUI User's Guide (Settings)" for details.
• Status
The Virtual Volume session status is displayed.
- Normal
All the copy sessions are in the normal state.
- Error
At least one copy session is not in the normal state.
●
Advanced Copy Information
• Usable Advanced Copy Size
The Advanced Copy capacity that can be added to the session is displayed.
360
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Reserved". Click the [Session
P2X0-1260-19ENZ0