Fujitsu ETERNUS DX60 S3 User Manual page 134

Chapter 3 Component Status
3.8 Channel Adapter Detail
- For the ETERNUS DX200F
• FC 2port
• 10G-iSCSI 2port
Note that a 1-port type CA for the ETERNUS DX60 S3/DX100 S3 is displayed as "2port" (for FC, "FC 2port" is
displayed). Similarly, a 2-port type CA (1G-NAS) is displayed as "1G-NAS 4port". Available ports can be
checked in the [Internal Parts] tab. Note that 1-port type CAs and 2-port type CAs are not available in
some regions.
• Status
The CA status is displayed. Refer to
• Status Code
The CA status code is displayed.
• Part Number
The part number of the CA is displayed.
• Serial Number
The serial number of the CA is displayed.
• Hardware Revision
The hardware version of the CA is displayed.
• Chip#n Status
The status of Chip#0 or Chip#1 is displayed. Refer to
• Chip#n Status Code
The status code of Chip#0 or Chip#1 is displayed.
• Chip#n Error Code
The error code of Chip#0 or Chip#1 is displayed.
• Chip#n Active EC
A "-" (hyphen) is displayed.
• Chip#n Next EC
A "-" (hyphen) is displayed.
"A.5 Component Status" (page 410)
134
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
"A.5 Component Status" (page 410) for details.
P2X0-1260-19ENZ0