Chapter 5 Connectivity Status
5.8 NAS
-
Warning
The drive usage warning value is displayed.
If not specified, "Not Specified" is displayed. If the warning value cannot be obtained, a "-" (hyphen) is
displayed.
The warning value is displayed with the largest unit (TB/GB/MB) after rounding off to two decimal
places. Refer to the Note of
-
Limit
The drive usage limit value is displayed.
If not specified, "Not Specified" is displayed. If the limit value cannot be obtained, a "-" (hyphen) is
displayed.
The limit value is displayed with the largest unit (TB/GB/MB) after rounding off to two decimal places.
Refer to the Note of
•
File Count
The number of used files is displayed.
-
Used Count
The current file count is displayed.
If no quota target user or group is registered in the authentication server, or if the used count cannot be
obtained, a "-" (hyphen") is displayed.
-
Used Rate
The usage rate of the file count limit value is displayed between 0 - 100%.
Used Rate = Used Count / Limit
A "-" (hyphen) is displayed in the following conditions:
•
The limit value is not specified
•
No quota target user or group is registered in the authentication server
•
The used count cannot be obtained
For the used rate, the result of the division is rounded up to two decimal places. If the used rate is
larger than "0" but smaller than or equal to "1", "1 %" is displayed.
-
Warning
The file count warning value is displayed.
If not specified, "Not Specified" is displayed. If the warning value cannot be obtained, a "-" (hyphen) is
displayed.
-
Limit
The file count limit value is displayed.
If not specified, "Not Specified" is displayed. If the limit value cannot be obtained, a "-" (hyphen) is
displayed.
"Used Size" (page 302)
"Used Size" (page 302)
for details.
303
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
P2X0-1260-19ENZ0