Fc Port - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.3 CA Port Group
Filter setting
Filter
Name
Type
CA Port Group Member
Status
5.3.1

FC Port

Parameters of the FC ports that are registered in the ETERNUS DX/AF are displayed.
The following items are displayed in the Main area:
• Port
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the target port is
displayed.
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w
- For the other models
CM#y CA#z Port#w
• Type
The CA type of the target port is displayed.
• SFP Type
The SFP type of the target port is displayed. If an SFP is not installed, "Unmount" is displayed.
- SFP+(SMF)
An SFP (8G LongWave) that is installed in an 8Gbit/s (maximum) FC port.
- SFP+(MMF)
An SFP (8G SFP+) that is installed in an 8Gbit/s (maximum) FC port.
- 16G SFP+(SMF)
An SFP (16G LongWave) that is installed in a 16Gbit/s (maximum) FC port.
Input the CA port group name that is to be displayed.
When not using the name for filtering, leave this item blank.
Select the type of the CA port group that is to be displayed.
Select the location information of the member port for the CA port group that is to be
displayed.
Select the set state of the host affinity for the CA port group that is to be displayed.
257
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0