Fujitsu ETERNUS DX60 S3 User Manual page 299

Chapter 5 Connectivity Status
5.8 NAS
• Authentication Server (1)
The IPv4 address, IPv6 address, or the FQDN of the Active Directory authentication server is displayed.
If the Authentication Server (1) is not specified, the field is blank.
• Authentication Server (2)
The IPv4 address, IPv6 address, or the FQDN of the Active Directory authentication server is displayed.
If the Authentication Server (2) is not specified, the field is blank.
• Authentication Server (3)
The IPv4 address, IPv6 address, or the FQDN of the Active Directory authentication server is displayed.
If the Authentication Server (3) is not specified, the field is blank.
●
LDAP Authentication Server
• Domain Name
The domain name of the LDAP authentication server is displayed.
If the authentication server is not specified, the field is blank.
• Domain Administrator
The administrator name of the LDAP authentication server is displayed.
If the authentication server is not specified, the field is blank.
• Authentication Server (1)
The IPv4 address, IPv6 address, or the FQDN of the LDAP authentication server is displayed.
If the Authentication Server (1) is not specified, the field is blank.
• Authentication Server (2)
The IPv4 address, IPv6 address, or the FQDN of the LDAP authentication server is displayed.
If the Authentication Server (2) is not specified, the field is blank.
• Authentication Server (3)
The IPv4 address, IPv6 address, or the FQDN of the LDAP authentication server is displayed.
If the Authentication Server (3) is not specified, the field is blank.
●
Local User
• ID
The user ID of the local user is displayed.
If the local user authentication that has been supported by controller firmware versions V10L51 and earlier
is used, "450" is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
• Name
The local user name is displayed.
If the local user authentication that has been supported by controller firmware versions V10L51 and earlier
is used, "shareuser$" is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
• Primary Group
The primary group name to which the local user belongs is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
• Secondary Group(s)
The secondary group names to which the local user belongs are displayed.
If multiple secondary groups exist, all factors are separated with a "," (comma) and displayed. If no
secondary group name exists, a "-" (hyphen) is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
299
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0