Fujitsu ETERNUS DX60 S3 User Manual page 320

Chapter 6 RAID Group Status
6.5 RAID Group Detail (Basic)
• Progress
The progress of a process that is being performed is displayed with a bar and a rate (%). To display the lat-
est progress, refresh the screen. If no process is being performed, a "-" (hyphen) is displayed.
• Estimated Time Left
The estimated remaining time before recovering is complete is displayed. To display the latest estimated
remaining time, refresh the screen. This item is not displayed when the process is other than "Recovering".
- Calculating
The ETERNUS DX/AF is calculating the estimated remaining time.
- 30 days or more
The estimated remaining time is 30 days or more.
- x days y h z min. (x: 1 - 29, y: 0 - 23, z: 0 - 59)
The estimated remaining time is more than one minute and less than 30 days. When the estimated
remaining time is less than one day, the "days" value is omitted. When the estimated remaining time is
less than one hour, the "days" and "hours" values are omitted.
- Less than 1 min.
The estimated remaining time is less than one minute.
The "Estimated Time Left" value may increase or decrease due to the I/O load when displaying this item.
• Remaining Size
The remaining size of the unrecovered RAID group is displayed. To display the latest size, refresh the
screen. This item is not displayed when the process is other than "Recovering".
The remaining physical capacity in the drive that is being recovered is displayed. Note that the remaining
capacity may be larger than the capacity that is currently being used by users.
• Stripe Depth
The Stripe Depth (*1) of the RAID group is displayed.
If the RAID level is "Mirroring (RAID1)", a "-" (hyphen) is displayed.
*1: The number of logical blocks that are assigned to a drive for each stripe when configuring a stripe volume in a
RAID group. Normally, it is 64KB.
- 64 KB
- 128 KB
- 256 KB
- 512 KB
- 1024 KB
320
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0