Fujitsu ETERNUS DX60 S3 User Manual page 3

This manual provides operational information about Web GUI for the FUJITSU Storage ETERNUS DX60 S3/
DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Disk Storage
Systems and Web GUI for the FUJITSU Storage ETERNUS AF250/AF650, ETERNUS DX200F All-Flash Arrays
(hereinafter referred to as "ETERNUS Web GUI"). It should be used for reference when monitoring the FUJITSU
Storage ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, ETERNUS DX8100 S3/DX8700
S3/DX8900 S3 Disk Storage Systems, and the FUJITSU Storage ETERNUS AF250/AF650, ETERNUS DX200F All-
Flash Arrays (hereinafter referred to as "ETERNUS DX/AF" or "storage system").
Knowledge of UNIX or Windows® system management is required.
This manual is written for controller firmware versions V10L60 and later. (V10L61 and later in a Unified Stor-
age environment.) Some of the functions herein may not be supported for firmware versions V10L5x and
earlier.
Structure of This Manual
This manual consists of the following eight chapters and three appendices.
●
Chapter 1 Screen Operations
This chapter describes operation screens for ETERNUS Web GUI.
●
Chapter 2 System Status
This chapter describes system status.
●
Chapter 3 Component Status
This chapter describes component status in the ETERNUS DX/AF storage systems.
●
Chapter 4 Volume Status
This chapter describes volume status.
●
Chapter 5 Connectivity Status
This chapter describes connection status between the host and the ETERNUS DX/AF storage systems.
●
Chapter 6 RAID Group Status
This chapter describes RAID group status.
3
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Preface
Nineteenth Edition
November 2016
P2X0-1260-19ENZ0