Fujitsu ETERNUS DX60 S3 User Manual page 302

Chapter 5 Connectivity Status
5.8 NAS
• Name
The quota target user name, group name, or shared folder name is displayed.
For the home directory, "homes" is displayed for this item.
• Used Status
The use state for the quota target drive space or file count is displayed.
If the drive space use state and the file count use state do not match, the use state is displayed according
to the priority.
- Normal
Normal status (The usage is below the warning value. If the warning value is not specified, the usage is
below the limit value.)
- Warning
The usage has exceeded the warning value but is below the limit value.
- Exceeded
The usage has exceeded the limit value.
- Unknown
Other than above.
The priority for the use state is "
• Drive Space
The usage amount of the drive is displayed.
- Used Size
The current drive usage amount is displayed.
If no quota target user or group is registered in the authentication server, or if the usage amount
cannot be obtained, a "-" (hyphen") is displayed.
The usage amount is displayed with the largest unit (TB/GB/MB) after rounding off to two decimal
places. For example, if the usage amount in the ETERNUS DX is "1572864000 KB", "1.46 TB" is
displayed.
- Used Rate
The usage rate of the drive usage limit value is displayed between 0 - 100%.
Used Rate = Used Size / Limit
A "-" (hyphen) is displayed in the following conditions:
• The limit value is not specified
• No quota target user or group is registered in the authentication server
• The used size cannot be obtained
For the used rate, the result of the division is rounded up to two decimal places. If the used rate is
larger than "0" but smaller than or equal to "1", "1 %" is displayed.
Unknown" > "
302
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Exceeded" > " Warning" > " Normal".
P2X0-1260-19ENZ0