Fujitsu ETERNUS DX60 S3 User Manual page 252

Chapter 5 Connectivity Status
5.2 Host Group
• Status
Whether the host affinity setting is applied to the iSCSI host is displayed.
"Host Affinity Setting" is to specify association between "Host Group", "CA Port Group", and "LUN Group" or
association between "Host", "CA Port", "and "LUN Group". The host affinity setting specifies the path
between each host and port.
- Active
The host affinity setting is applied to the iSCSI host. The LUN group can be accessed from the iSCSI host.
- Inactive
The host affinity setting is not applied to the iSCSI host.
• IP Version
The IP version when the IP address was registered for the iSCSI host is displayed.
• IP Address
The IP address of the iSCSI host is displayed.
Note that the IPv6 address is displayed as an abbreviation. Refer to
details.
If the IP address is not specified, the field is blank.
• Alias Name
The iSCSI host Alias Name is displayed.
If the Alias Name is not set, the field is blank.
• CHAP User ID
The CHAP user name of the iSCSI host is displayed.
If the CHAP user ID is not specified, the field is blank.
Filter setting
Filter
Name
iSCSI Name
Host Group
CA Port Group
CA Port
Host Response
Status
IP Version
IP Address
Alias Name
Input the iSCSI host name that is to be displayed.
When not using the name for filtering, leave this item blank.
Input the iSCSI name of the iSCSI host that is to be displayed.
When not using the iSCSI name for filtering, leave this item blank.
Input the name of the host group to which the iSCSI host that is to be displayed belongs.
When not using the host group for filtering, leave this item blank.
Input the name of the CA port group that has the host affinity setting with the iSCSI host
that is to be displayed.
When not using the CA port group for filtering, leave this item blank.
Select the CA port that has the host affinity setting with the iSCSI host that is to be
displayed.
Select the name of the host response that is assigned to the iSCSI host that is to be
displayed.
Select the set state of the host affinity for the iSCSI host that is to be displayed.
Select the IP version for the iSCSI host that is to be displayed.
Input the IP address for the iSCSI host that is to be displayed.
The iSCSI hosts that match the beginning of the entered IP address are displayed.
When not using the IP address for filtering, leave this item blank.
Input the Alias name of the iSCSI host that is to be displayed.
When not using the Alias name for filtering, leave this item blank.
252
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"IPv6 Address Notation" (page 253)
Description
for
P2X0-1260-19ENZ0