Fujitsu ETERNUS DX60 S3 User Manual page 191

Chapter 3 Component Status
3.24 Port Detail
- IPv6 Gateway Address
An IPv6 address for the gateway without VLAN IDs is displayed.
Note that the IPv6 address is displayed as an abbreviation. If not specified, a "-" (hyphen) is displayed.
• IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to
- MTU Size
The MTU size is displayed.
A "-" (hyphen) is displayed when the MTU size is "0".
- MAC Address
The MAC address of the port is displayed.
- Part Number
The part number of the port is displayed.
If the part number cannot be acquired, a "-" (hyphen) is displayed.
- Serial Number
The serial number of the port is displayed.
If the serial number cannot be acquired, a "-" (hyphen) is displayed.
- Hardware Revision
The hardware version of the port is displayed. If the hardware version cannot be acquired, a "-"
(hyphen) is displayed.
- SFP Type
When the port type is "10G NAS", SFP type in the port is displayed. If the SFP is not installed, "Unmount"
is displayed.
If the "Type" is not "10G NAS", the display status varies according to the screen. This item is not
displayed in the [Port Detail] screen.
• SFP+
• SFP+ Copper
• Unknown
• Unmount
When the "Type" is "10G NAS", the temperature, voltage, current, transmission power, and received power
for the SFP in the port are displayed.
Refer to "FC port" (page 174)
■ Sensor Information
The real time and threshold values (Low/High) for the temperature, voltage, current, transmission
power, and received power are displayed in the Sensor Information.
When the information cannot be obtained, a "-" (hyphen) is displayed.
The target components for this information are 10G NAS that have SFPs from which information can be
obtained.
Refer to
"IPv6 Address Notation" (page 253)
for display items.
"Sensor Information" (page 178)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
for display items.
191
P2X0-1260-19ENZ0