Appendix B Station Manager Status
The EIS001 Station Manager interface supports an additional command switch A that can be used
with the stat and tally commands to gather statistics and configuration settings from the module.
Typically these are for tech support to use, but they can be used to debug a system prior to engaging
GE IP support. Below are examples of its usage in the STAT and Tally Commands
STAT a
The Stat a command is designed to be self-documenting in its output, it represents many of the
configuration and operational parameters, settings, or status of the EIS001.
Figure 27: Response to stat a Command
GFK-2949C
July 2017
62