Status Area; General Table View; Figure 26: Status Area Contents And Layout; A Ppendix A D Efinition Of The S Tatus A Rea - GE PACSystems RX3i User Manual

Appendix A Definition of the Status Area
A-1 General Table View
9 8
Number if
times PLC
Write was
0x 9902 blocked
This EIS is in a
10x CRU CPU 9904
Client Client
Connection Connection
20x 07 06
Event Count Event Count
30x MEPTC_IDX MEPTB_IDX
Status of
Connection
check, 9999
blocking, 1
40x not
50x
60x
70x
80x
CTR
90x 9999
Notes:
CTR This is the table update counter, when both word 0, and the word after the 9999 marker are equl, the table is stable to use
# A Word that has a constant value in it
Future counters and indicators space
Note: The status representing the "Client Connection 01 to 08" in Status area are only applicable with
Multiple Client connection configuration with RBE on one Client connection.[ See Bit5/Bit6 of optional
parameter -mCommreq_Setup[66]. The value (0x02) indicates "Client Connected" and value(0x03)
indicates "Client Disconnected".
GFK-2949C
7 6
9901
PLC Write
Task
Last Number of
Sequence New Point
Processed in Point Push Push buffers
Point Pus Process State read
Client Client Client
Connection Connection Connection
05 04
Event Count Event Count Event Count
MMENC_IDX MMENB_IDX MMENA_IDX
Status of Que
full check, Number of Number of
9999 times Auto times Point
blocking, 1 Scan was Push was
not blocked blocked

Figure 26: Status Area Contents and Layout

July 2017
5 4 3
PLC Read Main Task
Task Alive Alive
0 Counter Counter
Time is NOT
Valid
indicator
9903 when 1
Client Client
Connection Connection
03 02 01
Event Count Event Count
MBO_IDX MST_IDX
Number of Number of
Times Read Times Read
Executed Triggered
2 1
Ver_2 Word Ver_1 Word CTR
ms of time it
Number of is taking to
Times Client read from
has updated PLC and
0 PLC Clock Process
This EIS is in a This EIS is in a
9905 Running CPU Active CPU
Client
Event Count Event Count Connection
MDP_IDX MSP_IDX
Analog Que Binary Que
Depth Depth
9906 Setting Setting
0
08
60