Service
Manual
14. THERMIC FUSE FAULT
15. OVERHEAT SAFETY SWITCH
16. EXHAUSTING FAILURE
17. HEATING ERROR
18. MOTOR OVERHEATING
19. INVERTER ERROR
20. COM FAILURE
04102011/GB
06.2009
Troubleshooting
c : Overheating detection > 240°C.
s : Cool down the machine using wet linen and change
the thermal fuse once the machine is stopped.
c : A overheating > 215°C is occurred.
s : Decrease the heating temperature by ironing wet
linen.
c : Default of the gas burned evacuation.
s : Check the exhaust duct of gas burned and the
ventilation of the machine .
c : Contactors default, the contactors remain stuck
despite the heating is stopped.
s : Stop the machine using the main switch and turn
manually the cylinder in order to avoid to burn the
ironing strips.
c : xxxxxxxxxxxxxxxx.
s : xxxxxxxxxxxxxxxx.
c : xxxxxxxxxxxxxxxx.
s : xxxxxxxxxxxxxxxx.
c : Communication default between boards.
s : Check the communication wires of boards.
51
5