Table of Contents
Advertisement
Using the installation wizard
Step 3: Date and time settings
Step 3 of the Installation wizard is for setting the date and time
attributes are described in
Next.
The clock supplies accurate date and time information to the system. It can be set to
run with or without a connection to a Network Time Protocol (NTP) server:
x
In the absence of an NTP server connection, the clock can be set to run manually.
The clock is battery backed and will continue to operate for several days after the
ODU is switched off.
x
If an NTP server connection is available, the clock can be set to synchronize with
the server time at regular intervals.
Figure 6-17 Step 3: Date and Time Settings page
6-20
Table 6-3.
Update the attributes as required and select
Chapter 6 Configuration and alignment
(Figure
phn-2182_002v000
6-17). The
May 2011
Advertisement
Table of Contents
