Table of Contents
Advertisement
Chapter 6 Configuration and alignment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter describes all configuration and alignment tasks that are performed when
a PTP 250 link is deployed.
Before proceeding with unit configuration and antenna alignment, observe the
precautions described in
Configure the two units, one as 'Master' and the other as 'Slave' by performing the
following tasks:
x
Connecting to the unit
power it up and open the web interface.
x
Upgrading firmware version
firmware version is installed on the unit.
x
Using the installation wizard
wireless, date and email attributes of the unit.
When all equipment has been installed at both link ends, perform the following tasks:
x
Aligning antennas
connectorized antennas.
x
Connecting link to the network
performance and connect to the network.
phn-2182_002v000
May 2011
Preparing for configuration and alignment
on page
6-3
describes how to connect a PC to the unit,
on page
6-10
on page
6-14
on page
6-24
describes how to align integrated and
on page
describes how to ensure that the latest
describes how to configure the LAN,
6-31
describes how to review link
Chapter 6
.
.
.
on page 6-2.
6-1
Advertisement
Table of Contents
