PTP 250 User Guide
Selecting a position for the ODU (connectorized)
If the ODU is connectorized, select a mounting position that gives it maximum
protection from the elements, but still allows easy access for connecting and
weatherproofing the cables. To minimize cable losses, select a position where the
antenna cable lengths can be minimized.
Mounting the ODU
To mount the ODU, proceed as follows:
1
2
3
phn-2182_002v000
May 2011
Attach the ODU bracket strap to the pole using M8 x 70 mm bolts, M8
flat washers and M8 coil washers.
Tighten to ensure the assembly grips, but can be adjusted on the pole.
Use the integral safety loop
bracket, observing the precautions described in
precautions
on page 5-5.
When the ODU is in position, use the safety loop as a fixing point to
secure a permanent safety lanyard from the supporting structure to the
ODU, as a precaution against mounting failure.
(Figure
5-1) to hoist the ODU up to the
Installing the ODU
Checks and safety
5-7