GE LOGIQ E9 Service Manual page 166

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5180483-100, R

Print button actions can also be modified per model (abdomen, etc.) by settings in

Utility -> Application -> Print Controls. Inspect them when print button behavior differs from

PROPRIETARY TO GE

Print Button Settings

Print buttons use the same formats as Compression on the Imag e Storage

NOTE: Suppose compression is specified on both a print button and on

an image storage service, either assigned to the button or assigned to the

dataflow in use. Also, suppose the compression settings are different. At

the point the LOGIQ E9 is to send an image generated by the print button

to the service, the LOGIQ E9 will first un-compress the compressed

version of the print button, and then recompress it using the settings of the

service. If the compression of the print button is lossy, the un-compression

will not completely restore the original image. Then applying the

compression of the service still generates a lossy image. The process of

un-compressing and recompressing only has a negative impact on

system performance.

In general then, DO NOT use compression on a print key if images it

generates end up getting sent to a service; or, IF YOU DO, use the exact

same compression on the service.

Section 3-9 - Connectivity Setup and Tips

Troubleshooting