Reading In Lockset File - Siemens SINUMERIK 840D sl Operating Manual

Operator control (software)
6.5 CNC Lock function
Result
Information on deactivating the CNC lock function on the control can be found in the following
manuals:
● "Basic Functions" Function Manual
109481523), Section "P4: PLC for SINUMERIK 828D > CNC lock function"
● "SINUMERIK 808D, SINUMERIK 808D ADVANCED Commissioning Manual
support.industry.siemens.com/cs/de/de/view/109736343/en)", Section "Other frequently
used functions", "CNC lock function".
Managing data
To manage the data, you can save the entered data in a dedicated file on the PC.
Click the "Save data" button to save the entered data in a "user_lockset.ulcs" file on the PC.
To retain clarity when a large number of files are involved, information such as which customer
has installed which CompactFlash card in which machine can be entered in the comment field.
NOTICE
Do not forward to customers!
Do not forward this file to end users! The file contains the PIN in plain text. With the PIN the
customer can remove the lock.
Click the "Load data" button to load the "user_lockset.ulcs" file and read the information stored
there.
6.5.5

Reading in Lockset file

Requirement
Note
Setting the time in the control
Before the lockset file is read-in for the first time, the clock in the control must be set correctly
because the clock at the point in time of the activation of the CNC lock function is saved as
the start value for monitoring.
146
Software option
You require the following option in order to use this function: "CNC lock function
6FC5800-0AP76-0YB0".
(https://support.industry.siemens.com/cs/us/en/view/
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
(https://