If a copied-in alarm text file does not become effective, there could be a problem with the time
stamp of the file. You will find more information in the Commissioning Manual of the relevant
control.
Note
Restart for 808D
It is not possible to trigger an HMI restart via remote control for the SINUMERIK 808D. Trigger
the HMI restart locally on your machine with the shortcut <CTRL+R>.
Operating sequence
1. Connect yourself to a control.
2. Create (Page 92) or open (Page 95) a project.
3. Copy (Page 115) the alarm text files from the project to the control.
4. After copying has been successfully completed, start the remote control.
Figure 6-45
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Remote control (e.g. SINUMERIK 840D sl / 828D)
Operator control (software)
6.2 Project
127