Siemens SINUMERIK 840D sl Operating Manual page 96

Operator control (software)
6.2 Project
Operating sequence "Using the menu"
1. Select "File > Open project" from the menu.
2. The following dialog appears. The projects that were last opened are displayed in this dialog
and can be subsequently selected, whereby the last project that was opened is preselected.
Figure 6-14
3. Select a project that should be opened. If the required project is not listed for selection, you
can search for the project on the PC using "Search". In this case, a search is made for
project files with the extension (*.rcsproj).
96
Open project
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA