5.5.3.3
Assigning parameters for the TS Adapter
Operating sequence
1. In the PG/PC interface, set the access point you wish to use when connecting to the
TS Adapter. In this instance, we are using a network connection to the PC via USB.
2. Select "Options" > "Settings".
The following dialog appears.
Figure 5-11
3. Set the network connection to connect you with the TS Adapter directly.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Settings
Connection to the control
5.5 Establishing a modem connection
43