Disconnect Connection - Siemens SINUMERIK 840D sl Operating Manual

5.4

Disconnect connection

You can disconnect a current connection to the control. Note that disconnecting the connection
to the control also ends the remote control of your control.
Operating sequence
1. There are two ways of disconnecting an active connection:
– Press the "Disconnect"
– Select "Connection > Disconnect" in the main window menu.
2. Confirm the prompt dialog with "Yes".
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
button in the toolbar.
Connection to the control
5.4 Disconnect connection
35