Troubleshooting/FAQs
8.5 840D sl: Activate remote control for the VNC Viewer.
Further information
Operator Components and Networking Manual
Options for the VNC Viewer
Note
Do not change the factory settings!
To ensure that the VNC Viewer works properly, the following options must not be changed.
After starting the VNC Viewer, the following dialog opens:
Figure 8-1
After selecting the "Options ..." button, the following dialog opens:
168
VNC Viewer - Factory Settings
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA