Siemens SINUMERIK 840D sl Operating Manual page 120

Operator control (software)
6.2 Project
4. For the files that you want to transfer to the project, activate the checkbox in the appropriate
window. In contrast to the display in the upper area of the project dialog, the color and
configuration files are also displayed.
Figure 6-37
Note
If you activate the checkbox in one of the higher-level elements, the checkboxes for all
underlying elements are also activated. This means that if you want to transfer all alarm
texts, it suffices to activate the checkbox for "Alarm texts".
Note
If you want to edit colors, then you should also transfer these files; otherwise, the standard
template files from the project are used for this purpose. If colors have already been edited
on the control, then this information is lost if these files are not transferred.
120
Project dialog (ONLINE) - with activated checkbox for the files
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA