Open File "Logdrive.ini - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring the HMI system
2.3 Setting-up network connections
2. Example
[CONNECTIONS]
ConnectionNum=1
Connection1=//ACTTCU/FRONT,1
SK_Connection1=SL_PM_SK_LOCAL_TCU_USB
SoftkeyIndex1=3
SoftkeyTextContext1=SlPmLogicalDrives
SoftkeyTextFile1=slpmdialog
SoftkeyPicture1=sk_usb_front.png
AccessProgram1=7
AccessMachine1=7
AccessServices1=7
A new softkey then appears on the user interface at position HSK3 (position 3 on the
horizontal softkey bar) displaying the text with text ID SL_PM_SK_LOCAL_TCU_USB which
it reads from file slpmdialog_XXX.qm. The softkey also shows the icon sk_usb_front.png an
and is visible in the operating areas "Program", "Services" from access level 7.
2.3.6

Open file "logdrive.ini"

Prerequisite
You need access level 0 to call up the file.
Procedure
Open the file as follows:
1. Select the "Commissioning" operating area.
2. Press the "Editor" softkey (HMI only).
3. Press the "Memory Card (CF)" vertical softkey .
The "logdrive.ini" file is in directory: /user/sinumerik/hmi/cfg
4. Press the "Input" key to open the file.
24
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0