Siemens SINUMERIK 840D sl Operating Manual page 104

Operator control (software)
6.2 Project
Operating sequence
1. Open a project.
Figure 6-22 AMM with project dialog (OFFLINE)
2. From the tabs in the project dialog, select the file type (alarm texts, EasyScreen, tool
management texts or archives) to which you want to add a file.
3. Click the "Add..." button.
4. A dialog opens with which you can search for the relevant files in the file system.
The default setting of the filter is that only those files are displayed that correspond to the
selected file type (in the case of alarm texts, that means only
oem_alarms_plc_<language>.ts, oem_alarms_cycles_<language>.ts and
oem_partprogram_messages_<language>.ts files).
"<language>" designates a valid language identifier (e.g. deu -> German, eng -> English,
etc.).
5. Select one or more files and click "Open".
104
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA