Huawei SmartAX MA5603T Configuration Manual page 52

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
l
Networking
Figure 1-13
Figure 1-14
Figure 1-13 Example network for outband management through telnet in a LAN
Access node
NOTE
Issue 01 (2014-04-30)
For details about how to log in to the MA5600T/MA5603T/MA5608T by using the local
serial port, see 1.3.5.1 Login Through the Local Serial
For details about how to log in to the MA5600T/MA5603T/MA5608T by using the ETH
port, see the following:
– Configure the IP address of the PC that is used for logging in to the MA5600T/
MA5603T/MA5608T. This IP address is on the same subnet as the IP address of the
maintenance Ethernet port but is not the IP address of the maintenance Ethernet port.
For example, configure the IP address to 10.11.104.6.
– After logging in to the MA5600T/MA5603T/MA5608T, run the ip address command
to change the IP address of the device to 10.50.1.10/24.
– Change the IP address of the PC to be on the same subnet as the IP address of the
maintenance Ethernet port but is not the IP address of the maintenance Ethernet port.
For example, change the IP address of the device to 10.50.1.11/24.
shows an example network for outband management through telnet in a LAN, and
shows an example network for outband management through telnet in a WAN.
LAN
PC
The MA5600T/MA5603T/MA5608T is connected to the LAN using the straight using cable, and the IP
address of the maintenance Ethernet port of the MA5600T/MA5603T/MA5608T is in the same network
segment as the IP address of the maintenance terminal. Alternatively, the Ethernet port of the maintenance
terminal can be directly connected to the maintenance Ethernet port of the MA5600T/MA5603T/
MA5608T to manage the MA5600T/MA5603T/MA5608T in the outband management mode. In such a
condition, if the MA5600T/MA5603T/MA5608T uses SCUL/SCUB control board, and the peer device
does not support the cable autosensing function, a crossover cable must be used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LSW
PC
PC
1 Commissioning
Port.
27