Verifying Services - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3.
----End

10.6.2.9 Verifying Services

In the FTTD scenario, ONUs are installed in users' houses which are far away from the central
equipment room. ONUs provide remote service verification methods including PPPoE dialup
emulation, and multicast emulation to facilitate configuration and commissioning engineers to
verify services remotely after service configuration.
Prerequisites
ONUs and upper-layer devices have been connected properly. The BRAS and MGC/IMS have
been configured.
Background
Remote
Service
Verificati
on
Method
PPPoE
dialup
emulation
Multicast
emulation
Issue 01 (2014-04-30)
Parameter
DHCP
transparent
transmission
c. Click OK to save the settings.
Restart the HGW.
Choose Management > Device Management and click Restarting the Device.
Function
An ONU simulates a PPPoE user
terminal software to perform
dialup and interact with the BRAS
to verify the connectivity between
the ONU and BRAS.
This function enables you to
simulate a multicast user going
online and lead the program
stream to an ONU. You can check
whether the multicast service is
normal by checking the real-time
traffic of the multicast program.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
Enable
Description
l PPPoE dialup emulation requires a
l A user name, password, and
l An ONU supports a maximum of a
Multicast services configured in the
dynamic controllable multicast mode do
not support this function.
10 FTTD Configuration
service flow which does not belong to
a QinQ VLAN.
authentication mode must be
configured on the BRAS for the PPPoE
dialup emulation.
PPPoE dialup emulation.
810