Huawei SmartAX MA5603T Configuration Manual page 297

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
huawei(config)#encapsulation 0/3/1 vpi 1 vci 39 type pppoa llc
huawei(config)#encapsulation 0/4/1 vpi 1 vci 39 type pppoa llc
Step 7 Configure the user account security.
The PITP P mode can be enabled to protect the user account against theft and roaming. The
RAIO mode can be customized according to actual requirements. The encoding format required
by China Telecom is considered as an example. The encoding format required by China Telecom
is a customized format, corresponding to the cntel option.
huawei(config)#pitp enable pmode
huawei(config)#raio-mode cntel pitp-pmode
NOTE
For details about the PITP configuration for the user account security, see Configuring Anti-theft and Roaming
of User Accounts Using PITP.
Step 8 Save the data.
huawei(config)#save
----End
Verification
l
l
l
Configuration File
Configuration File for the ADSL access mode:
vlan 50 smart
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
adsl line-profile quickadd 3 2 snr 60 30 120 60 30 120
adsl channel-profile quickadd 3 interleaved-delay 10 10 rate 1024 2048 3096 1024
2048 3096
adsl line-template quickadd 3 line 3 channel1 3 60 70 channel2 3
interface adsl 0/2
deactivate 0
activate 0 template-index 3
alarm-config 0 1
quit
service-port 1 vlan 50 adsl 0/2/0 vpi 1 vci 39 inbound traffic-table index 5
outbound traffic-table index 5
service-port desc 1 description MA5600T/MA5603T/MA5608THW/Vlanid:50/adsl/smart
mac-address max-mac-count service-port 1 16
mac-pool xpoa 0000-1111-1010 300
pppoa enable
encapsulation 0/2/0 vpi 1 vci 39 type pppoa llc
pitp enable pmode
raio-mode cntel pitp-pmode
save
Issue 01 (2014-04-30)
Step 1: Set the VPI/VCI of the modem to 1/39 and encapsulation mode to llc-pppoa.
Configure the user name and password used for dialing (the user name and password must
be the same as those configured on the BRAS.)
Step 2: After the settings on the modem are completed, dialing is initialized, a network
connection is automatically set up, and the user can access the Internet.
Step 3: To download a file through FTP, open Windows Task Manager and then click
Networking to observe the link rate. Calculate the Internet access rate by the formula:
attainable Internet access rate = computer NIC rate/48 x 53 x 8. The calculated result
approximates to the planned 2048 kbit/s.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
272